View the manual for the Axis M1054 here, for free. This manual comes under the category Security cameras and has been rated by 3 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Axis M1054 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Axis M1054.
Brand | Axis |
Model | M1054 |
Product | Security camera |
EAN | 5052916430537, 5704327835707, 7331021030565, 7331021030572, 7331021030589, 7331021031104, 7331021032200, 7331021032521, 7331021032545, 778890554452, 5054533152878, 5054484152873 |
Language | English |
Filetype | manual_type_manual (PDF) |
Video formats supported | H.264 |
Maximum resolution | 1280 x 800 pixels |
Frame rate | 30 fps |
Viewing angle, horizontal | 84 ° |
Camera shutter speed | 1/24500 - 1/6 s |
Minimum illumination | 1.2 lx |
Sensor type | CMOS |
Optical sensor size | 1/4 " |
Progressive scan | ✓ |
Video motion detection | ✓ |
Active tampering alarm | ✓ |
Audio formats supported | AAC |
Built-in microphone | ✓ |
Sample rate | 8 kHz |
Supported network protocols | IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
Power requirements | 4.9 – 5.1 V DC |
Dimensions (WxDxH) | 59 x 41 x 95 mm |
Power over Ethernet (PoE) | ✓ |
Power consumption (typical) | 6.5 W |
Power source type | PoE |
Ethernet LAN (RJ-45) ports | 1 |
Weight | 160 g |
Processor model | ARTPEC-3 |
Certification | EN 55022 B, EN 61000-3-2, EN 61000-3-3,\nEN 55024, FCC 15 B, ICES-003 B, VCCI B, C-tick AS/NZS CISPR 22, KCC B, EN 60950-1 |
Flash memory | 128 MB |
Internal memory | 128 MB |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 20 - 80 % |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Axis M1054 below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Axis M1054 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Axis M1054 owners to provide you with a good answer.
Number of questions: 0