DeWalt DDF211022 manual

DeWalt DDF211022
7.5 · 1
PDF user manual
 · 32 pages
English
user manualDeWalt DDF211022
Model P2201 Cat. No. DDF211022P

P2201

1

P2201

OPERATING INSTRUCTION MANUAL

DO NOT OPERATE THE P2201 TOOL UNTIL

YOU HAVE READ THIS MANUAL AND RECEIVED THE PROPER TRAINING
ACCORDING TO ANSI STANDARD A 10.3-1995.
PRIOR TO OPERATING THE P2201 TOOL,
STUDY THIS MANUAL CAREFULLY AND DEVELOP A THOROUGH
UNDERSTANDING OF THE CONTENTS.
PROPER TRAINING ACCORDING TO THE CURRENT ANSI
STANDARD A 10.3, SAFETY REQUIREMENTS FOR POWDER
ACTUATED FASTENING SYSTEMS MUST BE COMPLETED AND
A D
EWALT QUALIFIED OPERATOR CARD MUST BE OBTAINED
PRIOR TO OPERATION OF THE TOOL. STATE, LOCAL, OR
OTHER REGULATIONS SHOULD ALSO BE FOLLOWED. LAWS,
REGULATIONS, AND STANDARDS REGARDING THE USE
OF POWDER ACTUATED TOOLS MAY PERIODICALLY BE
REVISED. ANY SUCH REVISIONS MAY CHANGE THE SAFETY
AND OPERATING PROCEDURES DESCRIBED IN THIS MANUAL.
D
EWALT, INC. IS NOT RESPONSIBLE FOR ANY SUCH REVISIONS
WHICH OCCUR AFTER PUBLICATION OF THIS MANUAL. IT IS THE
RESPONSIBILITY OF THE USER TO MAINTAIN FAMILIARITY WITH
THE CURRENT LAWS, REGULATIONS, AND STANDARDS THAT
APPLY TO THE POWDER ACTUATED TOOL.
TO AVOID SERIOUS INJURY OR DEATH:
NEVER CLOSE TOOL WITH ANY PART OF HAND OVER MUZZLE END.
OPERATORS AND BYSTANDERS MUST WEAR
EYE AND HEARING PROTECTION.
R2200
R2200
ALWAYS
ASSUME
TOOL IS LOADED.
DO NOT PLACE A
FINGER ON THE
TRIGGER
OF LOADED TOOL UNTIL MUZZLE END IS AGAINST WORK
SURFACE AND YOU ARE READY TO MAKE A FASTENING. NEVER
PLACE YOUR HAND OVER THE MUZZLE WITH A POWDER LOAD IN
THE TOOL. IF THE TOOL ACCIDENTALLY DISCHARGES THE PISTON
OR FASTENER MAY PENETRATE YOUR HAND RESULTING IN
SERIOUS INJURY.
TOOL OPERATION MUST READ AND UNDERSTAND
THE ENTIRE TOOL MANUAL AND MUST COMPLETE
THE OPERATOR’S EXAM ON THE LAST PAGE. THE
TOOL WARRANTY WILL NOT BE VALID UNTIL THE TEST IS
RECEIVED, WITH A COPY OF YOUR RECEIPT, AND REVIEWED
BY D
EWALT, INC.

Warranty

Three Year Limited Warranty
D
EWALT will repair, without charge, any defects due to faulty
materials or workmanship for three years from the date of
purchase. This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.dewalt.
com or call 1-800-4-DEWALT (1-800-433-9258). This
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights any you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D
EWALT tools are covered by our:
1 YEAR FREE SERVICE
D
EWALT will maintain the tool and replace worn parts caused
by normal use, for free, any time during the first year after
purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your D
EWALT Powder Actuated Tool for any reason, you can
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing call
1-800-4-DEWALT (1-800-433-9258) for a free replacement.

Introduction

Thank you for purchasing the DEWALT P2201 low velocity
powder actuated tool. This tool will provide you with excellent
performance provided the steps for proper operation and
maintenance are followed. Powder actuated fastening
systems can provide a cost effective method of attaching
fixtures for light duty, static load conditions. The systems
provided by D
EWALT consist of specially designed fasteners,
installation tools, and powder loads which are designed to
function in combination to provide optimum performance.
While powder actuated tools can provide one of the fastest
and economical means of fastening, they can also be
dangerous if they are not operated properly.
Prior to operating the P2201 tool, you must be properly
trained in the operation and maintenance of this tool and be
issued a D
EWALT Qualified Operator Card. When using the
tool, you must have this card in your possession. As part
of the training process, you should read and understand
the contents of this instruction manual especially the safety

Low Velocity Powder

Actuated Fastening Tool

POW2273_manual_P2201_dewalt.indd 1 3/10/14 12:41 PM

User manual

View the manual for the DeWalt DDF211022 here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the DeWalt DDF211022 or do you need help? Ask your question here

Need help?

Do you have a question about the DeWalt DDF211022 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other DeWalt DDF211022 owners to provide you with a good answer.

Number of questions: 0

DeWalt DDF211022 specifications

Below you will find the product specifications and the manual specifications of the DeWalt DDF211022.

General
Brand DeWalt
Model DDF211022
Product Not categorized
Language English
Filetype manual_type_manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the DeWalt DDF211022 below.

Is your question not listed? Ask your question here

No results